BMW Radiator/Cooling System Information part 2
| With any older BMW (and I'm talking neu klasse through E34), its important not to let the temp gauge needle reach the 'red' area. This is the point of no return, after this the cooling system is incapable of effectively cooling the engine. The only choice now is to shut off the car's engine. Generally speaking, changing thermostats will not prevent the cooling system from running hotter than normal or from overheating (exception being when the thermostat sticks open in the winter). BMW thermostats have a range of 71° C to 80° C, and their function is to ensure a minimum operating temperature for optimal efficiency and long term engine life. Water pumps themselves never fail. A pump will always pump coolant unless there is no coolant in the tank or the V-belt is removed or broken. There are two real world ways in which water pumps do fail. They leak - usually from the small vent hole on the bottom, or the shaft bearing wears out. If your radiator is junk, upgrade your older BMW's radiator to an aluminum one. The price difference is small and the efficiency is much greater. On pre 1980 BMW's with M30 engines (or M20 320/6 or 323i models), use the post 1980 water pump as they are slightly larger. Fan clutch failures almost only ever occur with the earliest six cylinder models, such as Bavaria, 3.0 CS, 3.0 CSi, 3.0 CSL, 530i etc. If there is resistance from the clutch when spinning the fan by hand, it's probably in good shape. |